TXTest is simply a program that  can be used with any KISS TNC 
to send simple KISS frames.  

You specify a callsign, baudrate and COM port, push 
the transmit button and a KISS frame will be constructed
and sent out the COM port you specified at the baud rate
you specified.

This program is useful for testing your TNC to make sure
that the transmitter chain is working properly.  If
this program works with your TNC, but another program that
is more complex to set up does not work, it probably means
that you don't have that program configured correctly.


If you have any questions, contact John Hansen at hansen@fredonia.edu

This program was written by John Hansen.  It is distributed as
freeware.  It may be freely distributed to anyone.  